This and that

Hi there how are you today? I hope you are doing good and enjoying this new week. Here in Normandy, France the weather is getting colder every day and we have had a lot of strong winds and rain. Just an all over “stay inside and knit” weather. And according to the weatherman, that’s what we will be getting all week long. I do find bad weather a bit depressing, especially when I’m working. I don’t mind so much on a Sunday when bad weather is the perfect “excuse” to just cozy up in a comfortable chair and knit all day long. I never get enough of those days.

Christmas is not far off now and we are seeing Christmas decorations being put up in the streets and my youngest is already counting down the days till Christmas. So far I have not done any Christmas gift knitting and I don’t think I will. I did knit a lot for last Christmas where I gave hat and mittens to a number of my family members. It wasn’t stressful or anything but this year I just don’t feel like it. Also I feel I just have so many things already on my needles that I really need to work on and most of those are either for myself or my kids. What about you? Are you doing Christmas gift knitting? If yes, what type of projects are you knitting or what type of projects do you usually knit as gifts? I’d love to hear from you if you care to share by leaving a comment below.

I have done lots of knitting this past week I think. I finished a pair of socks that I was test knitting and I have cast on for the second pair of test knit socks. I’m at the gusset on the first sock of this second pair. It is a two colour, slip stitch pattern and it goes quite fast but it does require some attention so I can only knit on this in the evening or weekends. It’s not the type of knitting I can do in between phone calls and just put down and pick up without further thought. Once the designer publishes her patterns I’ll be sharing the pictures with you here.

I have one finished object to share with you and that is a hat. I based it somewhat on the Sock Head Hat  but I did cast on fewer stitches and the cuff/ribbing is not as long. Also I used a colour work technique called Helix knitting. I used one colour, silver, for the ribbing and then 4 colours for the main body of the hat. To do Helix knitting you need to divide the number of stitches with the number of colours you are going to use. In my case I used 4 colours and that meant knitting each row with 4 different colours so to avoid a huge yarn tangle, one has to manage the balls of yarns and I used to move them around in the order I was using them and that worked very well. When doing Helix knitting, it is very important NOT to cross the yarns, that is when you leave one colour and pick up the next you do NOT twist the two yarns together as one would do in intarsia for example. You just have to leave the old yarn tail and pick up the new.

I find this technique really amazing because although your work is divided into sections of colour, when you look at your knitting, you could never guess it. This produces a striping effect with no jogs. What Helix knitting is, is in fact a technique that produces a spiral  of colour and I have some pictures to show you that will better explain what I mean.

helix-hat This is my finished hat. Like I said above, I used 4 colours so you see a pattern repeat of 4 colour stripes. On the very first row after the ribbing you can see the beginning of the spiral, you have some yellow and then some red.

helix-hat-with-yarnHere you can see the work from the “knitters perspective” and you can see that I’m knitting with all four colours each round.

helix-hat-yarn

I kept my yarns in a tote next to me and moved each ball away from me once I was finished knitting that particular colour and that helped me avoid a huge yarn tangle.

helix-hat-topIf you look at the crown of my hat you can clearly see the spiralling, especially apparent if you follow the red yarn.

I have seen this used in socks and I did cast on for a pair once but I think I never finished. It is a fun technique and I recommend you give it a go. Next time though, I will use fewer colours, I think 3 is a good number but then that is always going to be personal preference depending on what you are knitting and the stripe pattern you are looking for. The yarn I used for this was my Merino Light base, that is a merino singles yarn which is super soft and a joy to knit.

I’m also knitting on a simple brioche cowl. I dyed up a skein of this new base yarn that I’m trying out. It is a luxurious blend of 50/50 merino and silk. So the yarn is super soft to the touch and has a gorgeous shine to it. It is in fingering weight 400 meters per 100 gr. I dyed this up mostly grey but with a small section of the skein in gold.

Here you can see how the skein was mostly grey with just a small gold section. I didn’t want to knit this into a pair of socks, I felt it was too beautiful/precious a blend for that. I had already started on my Helix hat so I decided on doing a cowl. I didn’t have a pattern so I cast on a random number of stitches and decided I’d do this in brioche. Now I think I should have cast on fewer stitches as this is going to be quite large but not large enough for me to wrap it around my neck twice.

What was amazing to me was/is how this yarn knits up in brioche at this number of stitches. I had thought that because the gold colour was only on a small section of the skein, it would produce maybe a sort of spiralling block of colour but in fact it has created an overall pattern and not only that, but the pattern changes over the length of the cowl. I think that is really cool.

After having knit about half the yarn and realising that it was probably too large for just one wrap and not enough for two wraps, I decided I would be a good idea to decrease the stitch number and thus the cowl would be larger at the bottom hugging my shoulders and then decrease to create the neck part of the cowl which would be hugging the neck. I got out my brioche book “Knitting Fresh Brioche” by Nancy Merchant and found out how to do decreases. There were two for decreasing two stitches at a time, one right leaning and one left leaning. I followed the instructions and the decrease round itself looked fine but on the next round, where the decrease was, the stitches would become elongated and the fabric holey. It didn’t look good. So next time I did the other decrease and the same thing happened. I still continued thinking I could fix the holes afterwards, do some stitching somehow and I actually knit on for hours almost running out of yarn.  But when I looked at the cowl, all I could see were the ugly decreases. And I thought that was just no good. I was using a gorgeous yarn and the dye work was perfect and yet the only thing I saw were the flaws and I just knew I would never enjoy wearing this like this and so I decided I had to rip back. Ripping back brioche is not to be taken lightly. I decided this last night but I waited until this morning to actually rip back. Here you can see the cowl before the ripping back.

brioche-with-holes

I love the pattern created by the small gold section in the yarn. And here towards the top of the cowl/picture you can see the decreases and how they looked.

brioche-close-upAnd this is a close up and it may not look too catastrophic like this but once held up, the weight of the fabric really pulled on those stitches making the holes more apparent.

So this morning I again consulted my brioche book on how to rip back and off I went. I ripped to one row less than I wanted to rip back and I then ripped the last row slowly, a stitch at a time and picked up the stitch with a much smaller needle than I was using. That made the picking up so much easier and it really was a breeze.

But I did rip back almost half of my work and that is always sad, I always feel like I have lost so much precious knitting time but I really shouldn’t. After all I do love knitting so nothing to regret there, and I will end up with an item I will actually like and wear and that is most important. I did pause to think if I should just rip everything back and start all over again and cast on fewer stitches but decided against it. So I’m just going to continue as I was and we’ll see how it ends up being.

brioche-after-ripping-back

And here is my cowl this morning after the ripping back.

I have also started on my next Harry Potter themed knit for my oldest. If you follow my blog regularly you will know that she is a Harry Potter fan and that she asked me to knit her a large number of Harry Potter themed accessories and sweaters. So far I have done one scarf, a pair of socks and a pair of fingerless mitts. Now I have begun a pair of fair isle mittens. The pattern is called Owl Mittens by Celeste Young and can be found in the Unofficial Harry Potter Knits magazine from Interview Press.

I’m using my own yarn in my SOX base, the red/burgundy I dyed and the white is just undyed yarn. I’m not far along but so far I like it. I do think this will take a lot of time to complete because of the patterning all over. I’m trying to relax as I knit the fair isle so that the floats stay relaxed in the back. I really hate it when the fabric is all puckered up and tight. But so far so good and my daughter loves it and can’t wait for me to finish, especially now that the weather has really cooled down. Here are some pictures for you.

owl-mit-beginning

 

This is the back of the hand and this is a lot of owls on branches, there  will be three repeats of the owl pattern, each pattern repeat is unique.

owl-mit-backThis is the palm side of the mitt and here you have spells written out. I need to be careful with my tension here also because if it is too tight, the stitches will be too small and the words won’t be clearly written out.

So this is a challenging and time consuming knit that I will work on when not doing anything else and I think I will probably need  quite some time to finish but they will be gorgeous once done.

That’s about all for today I think. This week I’ll continue to work on my test knit socks, my brioche cowl and the Harry Potter mitts. I’ll also be going to an interview with a job counsellor to help me redo my resume and maybe get a clearer picture of what types of jobs I can apply for. I do have a full time job at the moment but I work from home and I have been doing that for a number of years and I feel that a change is needed and I’d love to work outside of my home and have real colleagues again. Maybe 2017 will be a year of change for me. You never know.

Thank you for stopping by today and spending some of your precious time with me. I’ll be back next week and until then take care and enjoy your knitting:)

My latest knits

Hi there again, it’s only been a few days since I last posted but I didn’t share with you my progress in that post. I do hope you took a look at the Antonia shawl I told you about a few days ago and that you were able to take advantage of the 50% off coupon code. If you did purchase the pattern, I’d love to see your finished shawl in the future so hopefully some of you will be sharing pictures of that later on.

Now on to my own knitting. So since last time, I have been knitting on a few projects. First finished object is my second Harry Potter fandom knit. This is for my oldest daughter who fell in love while browsing the Unofficial Harry Potter Knits magazine from Interweave. So that means I have now finished two projects and have 5 more to go! I will be casting on for project number 3 today.

So I just finished a pair of fingerless mittens called Hermione’s Time Turner mitts. These are an all over cable pattern with the letter H double stitched on the front. This was a small project but because of all the cables it did take me some time to finish. It’s not a pick up/put down constantly project so I only knit on this when I had enough time to do a few pattern repeats.

img_6086

I really like how these turned out. The yarn is a dark chocolate brown so the picture is quite dark but I hope you get the idea. Luckily my daughter loves them! So next up will be a pair of socks called Dragon’s Egg Socks. Those are actually written for men but I’ll knit the smallest size and just adjust the length. I have already wound up my yarn and printed out the pattern so all is ready to go.

The second finished object this week is a pair of thrummed slippers. I have been wanting to try thrums for a long time and I finally did it. The motivation was cold fee! As you may know, I work from home and so I sit at my desk for 8h a day and during the winter the house is not super warm, especially my bedroom which is where I work from. And so I find myself having frozen feet especially when I work the evening shift and so I thought I just had do something about this and decided to knit a pair of thrummed slippers. I went to Ravelry of course to look around for ideas and I found a paid for pattern by the Cozy Knitter called Thrummed Slippers. It’s a super simple pattern at a good price so I went ahead and purchased that. The pattern is written for a woman’s medium size. I’m very tall so I thought I’d go up a few needle sizes to accommodate for that….I really shouldn’t have!

I used my 100%BFL Aran yarn and some roving from my stash. The pattern is written for needle size 5mm or US8 and I used 6mm or US 10. This resulted in a very loose fabric and that is what I don’t like about my slippers. They did turn out ok though and I shared pictures of them on Instagram and got a lot of likes and nice compliments so I guess “from afar” they look better than up close:)

But it’s ok, these are just to be used when at my desk and not while I’m about the house or in the presence of others. And the other night I tried them and wow they are perfect! Super warm and fuzzy and the roving really keeps the feet warm. So all in all I’m happy with my new slippers. My kids loved them and two have asked me to knit them a pair so I have dyed up some more of my BFL Aran wool and I’ll be casting on for those next weekend I think.

But here’s a picture so you can see for yourself

img_6084

What do you think? They do look cozy, there is no denying that:)

My big wip at the moment is the Dexter cardigan by Isabelle Kramer. I’m knitting that using two lace weight yarns held together in stead of a fingering weight yarn. I shared with you a while back the yarns I dyed up for this. One is all grey and the others are variegated. I did dye up a lot more than I actually need. Lace yarns are just never ending! Currently I have finished the body, button band and all. And I’m on sleeve number one. So I used the grey and the variegated yarn for the body and then I used only the grey held double for the ribbing, neck and button bands. Then it was time for the first sleeve. I was wondering if I should do the sleeves in all grey too. I don’t think I had enough left of the first variegated skein to knit both sleeves and as I did the ribbing and button bands in all grey, I was wondering if I should stick to that and not add a new color to the equation.

Finally I decided that I would add a second variegated skein as I had planned for. I chose the softest/lightest coloured one so it actually looks quite grey but it still has some mauve and pinks in there. I’m almost done with the decreases so I’m guessing I’ll finish the sleeve this week and get going on the second so hopefully this cardigan will be all done in a week to ten days.

img_6087

The lighting is not good on this picture but you get an idea of where I’m at and what the colours look like.

When this one is done, I really should pick up the two big wips I have abandoned for months, a sweater for my daughter and a cardigan for myself so hopefully I’ll be able to refrain from casting on another cardi or sweater and get at least one of these two done!

I’m also knitting on a pair of simple socks using a sock blank and I think I’m going to do a post just about that. A lot of people are not familiar with sock blanks or they have seen them but are hesitant to buy and use them so I think that could be an interesting topic and to see how one knits up and so forth. I have one sock done and the second is about 30% done now so once I’m all done and the socks have been blocked and so forth I’ll be sharing that experience with you here.

That’ s all for today. I hope you have enjoyed spending some time with me today. I really enjoy sharing my knitting life with you. I don’t have any knitting friends where I live so the blog is such a happy place for me to share and get positive feedback and encouragement for my work. So thank you so much for stopping by and spending some of your precious time in my company.

I hope you will have a wonderful rest of the week and an even better weekend. Take care and “see” you soon:)

Self striping sock yarn and the Gilmore Girls

Hi there, do you enjoy knitting socks? Do you like self striping sock yarns? Do you enjoy colours? Do you watch the Gilmore Girls show?

If your answer is YES to any of these questions then you might be interested in an upcoming sock knitting kit.

I’m so happy and proud of this first collective collaboration that I’m doing with CC Almon of JavaPurlDesigns and Sam Boggia of KnitRunDig.

The three of us are working on this sock knitting kit that will be up for pre-order this coming Sunday June 12th. This is a very limited edition, only 30 kits will be made so once they’re gone, they’re gone for good!

Each kit will include a sock pattern by CC, a project bag by Sam, hand dyed yarn by Yours Truly and lots of little goodies. And everything is tied to the Gilmore Girls show.

I got to see a picture of the finished prototype sock last week and it is gorgeous! I was so happy and proud to see this new pattern all knit up in my self striping yarn. I can’t wait to get to knit a pair myself!

So all my dyeing efforts are currently concentrated on this project. I’m dyeing a 10 color self striping yarn and let me tell you, self striping is work and 10 color self striping is a LOT of work!

Here are a few pictures I have taken to share some of the preparations for this kit on my side.

This slideshow requires JavaScript.

l’m showing the finished ball of yarn all grey because I don’t want to spoil anything and we have not yet shown the actual yarn and pattern but I imagine that will be done in the future, unless we decide it would be more fun for you to discover the yarn as you open your package 🙂

So if you want to join in this fun and knit a pair of beautiful socks using a limited edition self striping yarn then you need to sign up for the preorder on the Java Purl Designs website here as of June 12th.

gilmore girls

That’s it for today. Thank you for stopping by and have a wonderful rest of the week:)